|
|
|
|
|
|
|
4
|
|
Sector
|
Railway Ancillaries Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Multi State Tenders
|
Ref.No
|
40923059
|
|
Closing Date
|
17 - Nov - 2020
|
57 Days to go
|
View Tender Details
|
|
Supply of traction transformer with required number of secondary traction windings along with protectionequipment, safety chain arrangement and ht cable with protection shield including termination crimping lugs,cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipmentmounting and earthing hardware and accessories including auxiliary machines such as oil pump, oil coolingblowers etc. (one set per basic unit). #*. supply of set of metal oxide gapless lightning arrestors (02 nos.) for 25 kv ac (one set per basic unit). #*. supply of current transformer and potential transformer for 25kv ac (one set per basic unit). #*. supply of igbt based pwm traction converter set including dc link with 100 hz resonance filter, brakechopper resistor, dc link earthing switch, pre-charging resisters and contactors and/or any other equipmentnecessary to reduce the effect of other harmonics on s&t equipment including termination crimping lugs, cablemarkers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting,earthing hardware and accessories including auxiliary machines as required (one set per motor coach). #*. supply of three-phase fully suspended asynchronous induction motors compatible with igbt based tractionconverter power supply, with coupling, gear box assembly, sensors and associated equipment includingtermination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, matingconnectors, equipment mounting and earthing hardware and accessories. #*. supply of microprocessor based train control and management system (tcms) with brake interface unitincluding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & othersignals (as per clause 4.1.1 (v) and 4.1.1(vii)) of rdso specification, wheel slip/slide protection & anti skidcontrols (as per clause no. 4.1.1 (xxi) & 4.24 of rdso specification), including integration with tcms ofautomatic door closure and brake system, as per clause 4.1.1(xiii). (one set per rake) #*. supply of submission of complete bogie design duly tested by structural as well as dynamic simulation andvalidation software as per details given in clause 4.7of rdso specification. design charges (in compliance to allthe clauses of 4.7 of rdso specification) #*. Supply of complete bogie assemblies (one set means bogies for one rake) using equipment ats.no.5 #*. supply of event recorder as per clause 4.10 of rdso specification (one set per rake). #*. supply of voice communication system, passenger information system including their integration, coachdisplays (both internal and external), front destination board (head code in dtcs), audio communication system,emergency talk back system and interface with the train monitoring system (tms), flush mounted alarm pushbutton mechanism with integrated dual leds including polycarbonate enclosure, external flush mounted ledbased passenger alarm indicator on each side of the coach and any other equipment required for interfacing piswith the receiver-equipment of tms as per clause 4.11, 4.12 and 4.21 of rdso specification. receiverequipment of existing train monitoring system (tms) shall be in the scope of supply of the purchaser and maybe mounted in the driving cab (one set per rake). #*. supply of passenger car surveillance system with facility to stream video in central server as per clause4.13 of rdso specification (one set per rake). #*. supply of complete pre-fabricated driver desk housing all the necessary equipment and driver/ guard seat,master cum brake controller, cab recording equipment, ccms (centralized coach monitoring system) ,including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables,mating connectors, equipment mounting and earthing hardware and accessories as per clause 4.14, 4.16, 4.17and 4.44 of rdso specification. note: cab radio shall be provided by ir for sections with gsm-r (one set perdtc). #*. supply of aspiration sensor based fire detection technology generally conforming to rdso specification no.rdso/2008/cg-04 rev 05 (one set per rake). #*. supply of speed indicating cum recording equipment as per clause 4.20 (one set per dtc). #*. supply of set of control equipment such as relays, contactors, circuit breakers and related switchgears etc.for propulsion system, controls and auxiliaries in the assembled form viz. cubicle or cabinet as per clause 4.22 ofrdso specification (one set per rake). #*. supply of load weighing system including redundant weight sensors at bogie level, junction boxes forinterfacing cables, mating connectors, ss hardware, cable markers and crimp contacts. the scope of supply ofpressure transducers shall be with supplier as per clause 4.26 (one set per rake). #*. supply of high voltage cable including isolation & protection system (electrical and mechanical) for feedingadjacent units including high voltage insul
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|